Ref: LW12.8-60

6 Komponenten Messrad - 60 kN - 9 kNm - PKW - SUV

60 kN radial load capacity
30 kN lateral load capacity
9.0 kN-m moment capacity
Measures 3 forces and 3 moments
Measures X & Z accelerations
Adapts to 12” and larger wheels
Low cross axis sensitivity
Environmentally protected
Temperature compensated
Rugged stainless steel construction
Tested to SAE J328 fatigue strength standard

Presentation

The LW12.8-60 High Strength Wheel Force Transducer (WFT) is capable of measuring all of the wheel forces and moments on passenger cars and light duty trucks. It provides independent output signals for vertical, lateral, and longitudinal forces as well as camber, steer, and torque moments. Being completely weatherproof, it is ideal for on-road and off-road measurements in all conditions. It can also be used to monitor and control laboratory tests. The matching amplifier package easily mounts onto the transducer. It amplifies and digitizes the transducer signals before they pass through the slip ring. The amplifier package also includes X and Z acceleration outputs and performs remote shunt calibration of the transducer.

Specifications

Maximum Force Capacity, [Fx, Fz] (radial)	60 kN
[Fy] (lateral) at Tire Patch	30 kN
Maximum Torque Capacity [Mx, My, Mz]	9.0 KNm
Accelerometer range	55g
Sensor	4 arm strain gage bridges
Nonlinearity	≤ 0.5% of full scale output
Hysteresis	< 0.5% of full scale output
Cross Axis Sensitivity after correction	< 0.5% of full scale output
Temperature Range, Operating	-40°C to 125°C
Angular Resolution	0.17°

CT2 Transducer Interface Box:

Performs real-time coordinate transformation and crosstalk compensation
Easy to use Zero, Shunt Calibration, and Bridge Power Off functions
Simultaneous Analog, CAN, & Ethernet signal outputs
Embedded web page enables user to change set-up options, move WFT measurement origin, view transducer static values, create .dbc file

Amplifier and Slip Ring Package:

Internal X & Z accelerometers
High resolution encoder for position & speed measurement
Internal smart chip contains all calibration, zero, & shunt values
Provides signal conditioning & amplification to the transducer strain gage signals
Digitizes Transducer, Encoder, & Accelerometer signals
Supports slip ring

: ± 0.5 %
Max Force Capacity, [Fx, Fz]: 60000 N
Hystérésis: 0.5 % FS
Versorgungsspannung: 10 Vcc